 |
Production of lithium and its compounds |  |
| Home |
| Power reactor nuclear fuel |
| Research reactor nuclear fuel |
| Lithium production |
| Other production |
| Lithium metal catalyst grade |
| Lithium metal battery grade |
| Lithium metal with increased Al content |
| Lithium metal LE grade |
| Lithium-7 hydroxide monohydrate |
| Lithium chloride |
| LIDOS sanitary |
| LIDOS domestic |
| LIDOS for swimming pools |
| Order Now |
| Li |  |
| LITHIUM METAL GOST 8774-75 |
| Appearance | Silvery-white metal | |
| Density | 0,543 g/cm3 | |
| Melting point | 180 °C | |
| Physical and chemical properties | Reacts violently with water. Ignites upon heating in the air | |
| Applications | Alloying component of light structural alloys. Reagent-catalyst in organic synthesis. Component of modifying fluxes in metallurgy of non-ferrous alloys. Anode material in manufacture of current sources | |
| Shape | Different section ingots in the form of
sectors, cylinders, and plates. Rod or wire of specified length. Surface of ingots, rods and pellets can be covered with protective paraffin or mineral oil layer or it shall be clean without any coating. |
|
| Chemical composition | Product grade according to GOST 8774-75 | |
| LE-1 | LE-2 | |
| Lithium fraction of total mass, % | 99,9 min | 99.0 min |
| Impurities fraction of total mass,% | ||
|
Sodium (Na) |
0,04 max | 0,1 max |
|
Potassium (K) |
0,005 max | 0,01 max |
|
Calcium (Ca) |
0,03 max | 0,03 max |
|
Iron (Fe) |
0,005 max | 0,01 max |
|
Aluminum (Al) |
0,003 max | 0,005 max |
|
Silicium (SiÎ2) |
0,01 max | 0,05 max |
|
Nitrogen (N) |
0,05 max | 0,05 max |
|
Magnesium (Mg) |
0,02 max | 0,05 max |
|
Manganese (Mn) |
0,001 max | 0,005 max |
| There are capacities for manufacture as per customer`s specification | ||
| Types of package | Cylindrical ingots are packed under argon in polyethylene aluminum-laminated bags which are welded and placed in bubble polyethylene packets. The latter are put in 210 dm3 steel drums which are then filled with dried argon. Prior to that, a protective polyethylene bag is inserted in a drum. | |
| For additional information on price, minimum product batch, and transportation costs please contact: | |
| Tel.: +7(383) 274-86-62, 274-83-46 Fax: +7(383) 274-23-97, 274-30-71 E-mail: market@nccp.ru nzhk@nccp.ru |
|