| Application |
Used as additive for oil cracking catalysts to increase octane number of cracked gasolines and to increase olefine content in cracking gases (raw material used in alkilate and polypropylene production
processes). |
| Operational advantages |
Introduction of 3% IK-17-1 zeolite powder in catalyst cracking composition makes it possibIe to increase gasoline octane number
by 1,5-2 with simultaneous 25-27 % increase of raw material fraction of total powder mass used for alkilation processes and
22-25 % increase of raw material for polypropylene production.
Low modulus of synthesized zeolite system with strictly defined crystal morphology makes it possibIe to obtain optimal cracking activity of catalyst product and to decrease coke-Iay down of
catalyst.
Catalytic activity in case of low residual Na2O content and in absence of modifying
elements.
Catalyst is based on the harmless to environment high silica zeolite system, it doesn't contain heavy metals and has no explosive and pyrophoric
properties. |
|
| Main physical and chemical properties |
| Structural form |
Zeolite, type ZSM-5 |
|
ZSM-5 zeolite fraction of total mass |
not less than 90% |
|
SiO2/Al2O3 molar ratio |
28-35 |
|
Sodium oxide fraction of total mass |
not exceeding 0,16% |
|
Specific surface |
not less than 400 m2/g |
|
Bulk weight |
within the range of 500-550
kg/m3 |
|
Geometrical dimensions: |
|
powder with crystal size |
1,5-1,7 micrometers
|
|
Original solutions in the field of IK-17-1 zeolite powder formulations, processes of powder production and application
are protected by a number of Russian Federation patents. |
|
| Package types |
During transportation by all types of transport, IK-17-1 zeolite powder is packed in
hermetically sealed polyethylene drums of 65 dm3
capacity. |